Mac OS X Tiger 10.4.3 For x86 PC破解版

Peter_2

《11.28补丁包1.1a　Mac OS X Tiger 10.4.3 For x86 PC破解版》(Mac OS X Tiger 10.4.3 For x86 PC patch)11.28升级补丁包1.1a[ISO]

资源分类：
    软件/操作系统
发布者：
    lzh56


eMule资源
下面是用户共享的文件列表，安装eMule后，您可以点击这些文件名进行下载
[url=[11.28补丁包1.1a　Mac.OS.X.Tiger.10.4.3.For.x86.PC破解版].10.4.3_8f1099_for_dtk_userdvd.dmg (2.95 GB)][11.28补丁包1.1a　Mac.OS.X.Tiger.10.4.3.For.x86.PC破解版].10.4.3_8f1099_for_dtk_userdvd.dmg[/url]        3.0GB


中文名称：11.28补丁包1.1a　Mac OS X Tiger 10.4.3 For x86 PC破解版
英文名称：Mac OS X Tiger 10.4.3 For x86 PC patch
资源类型：ISO
版本：11.28升级补丁包1.1a
地区：大陆
语言：普通话
简介：


[已通过安全检测]卡巴斯基反病毒Personal Pro 5.0.390 病毒库:2005.11.21
[已通过安装测试]WinXP+SP2+VMware
软件版权归原作者及原软件公司所有，如果你喜欢，请购买正版软件
共享服务时间:每天:8点至23点
共享服务器:R2服务器

软件名称：Mac OS X Tiger
版本号： 10.4.3 破解版
软件语言： 英文/简体中文

软件介绍：

11.28日又发布了1.1a补丁包，这下以前不能安装的8XX板也可以安装了。
地址如下：

http://www7.rapidupload.com/file.php?filepath=1416

用这个一个补丁包给UlraISO转换后的ISO文件打一次补丁后就可以安装了！

大家有什么疑问，可以在PearPC中文站来，这里有许多网友安装成功的经验可供参考!
　
以下是11.26日最新官方修补说明：

Maxxuss DVD/ISO Patcher for 10.4.3 x86 (8F1099)
This is the second release (v1.1) of my DVD/ISO Patcher. It will modify an ISO image of the Mac OS 10.4.3 x86 (Build 8F1099) DTK DVD. The result is a fully working ISO from which you can install Mac OS X on your system.

The minimum requirement for running Mac OS X 10.4.3 x86 is a CPU with SSE2 and PAE. See also my discussion on these confusing CPU features.

Contents of the DVD/ISO Patcher
The Patcher puts all the required patches for 10.4.3 and also some kernel extensions for better hardware support on the ISO. Here's the complete list:

Maxxuss Boot Loader Patch (applied to ISO)
Maxxuss Mach Kernel Patch v0.3 and, for non-NX/XD CPUs, v0.3b
Maxxuss Anti-TPM Patch v1.0: oah750, oah750d
Kernel Extensions:
ApplePS2Controller (keyboard, mouse, trackpad),
AppleGenericPCATA.kext,
AppleOnboardPCATA.kext (with NForce deviceIDs),
AppleAC97Audio.kext (with NForce deviceIDs) and Maxxuss VMWare Sound Driver,
Maxxuss VMWare Network Driver.
removes AppleTPMACPI and AppleFPMemDriver kernel extensions.
Most of these files are also contained in an installation package "MaxxussPatches.pkg" on the ISO , which is automatically installed during the Mac OS X installation procedure. So you do not have to do anything special before, during and afterwards.

Changelog
Added since v1.0: Kernel v0.3b (was v1.0_addon), broader NForce device support, Audio drivers.
Downloads
The download of the DVD/ISO Patcher v1.1 is available from these locations as a ZIP archive (~ 45 MB):

www.rapidshare.de
www.rapidupload.com
How to use the Patcher
Preparation of the ISO Image file
Convert the DMG to an ISO file. I used UltraISO v7.6.1125 (ed2k link) and clicked on "Tools -> Convert to Standard ISO".

The MD5 (output of md5sum) of my DMG image file is: daf72f000bd860360ae494d915058af6 ("10.4.3_8f1099_for_dtk_userdvd.dmg").
The MD5 of my ISO image file is: e7d86fefb4b5155890addbf7fae19398
(If yours differ, you still may give it a try as the patcher does not validate and would proceed even in case of different binaries).

Patching the ISO Image file
The Patcher file (.ppf) serves as an input for the PPF 3.0 patcher software. It is available for Windows, Linux and Mac OS X. For Mac, to prevent it from crashing, double-click the .ppf file (which starts PPF), then select ISO image and apply patch. There's also the command-line version and a Java version available.

Booting and Installing
The patched ISO image contains three different Mach Kernels. You need to boot the patched DVD/ISO with the right kernel for your CPU needs:

mach_kernel (default): same as mach_kernel.nonx,
mach_kernel.sse2: supports SSE2 CPUs, requires NX/XD CPU support,
mach_kernel.nonx: supports SSE2 CPUs, does not require NX/XD CPU support,
mach_kernel.orig: the original kernel, for use with SSE3 CPUs with NX/XD support.
If you're fine with the default kernel, there is nothing to do and can simply hit Return at the Darwin Boot prompt. But if you require for example "mach_kernel.sse2", then you should enter "mach_kernel.sse2".

Problems and Workarounds
Some users have noted they get the error "Cannot load /com.apple.Boot.plist" after the boot prompt. This should help: Enter the boot promt and hit Return or a boot option.
If have made it past the boot promt and the system loads for a while but then hangs and nothing seems to happen anymore, don't give up! Just wait a while, up to 5 minutes. It's often seen (usually in VMWare) that the DVD drive virtualization causes these stalls, but the system resumes after a while.
If nothing helps, use boot options "-v -s" (additionally to your kernel selection) and see what is printed to the console. The "-s" option should get you into single-user mode. If you can get here, press Ctrl-D to resume the boot procedure. If nothing works, make a note of the console output and visit the forums.
Booting from the Installed Mac OS X Volume
After the installation has succeeded, you can now boot your new system. As before, there are several kernels available for your CPU needs (see the list above: mach_kernel, mach_kernel.sse2, mach_kernel.nonx and mach_kernel.orig.

To select your kernel of choice, you have several options:

Enter the name at the boot promt, e.g. "mach_kernel.nonx",
As root or with "sudo" copy the kernel file to "mach_kernel", e.g. "cp /mach_kernel.sse2 /mach_kernel",
As root or with "sudo" edit the file "com.apple.Boot.plist" in the folder "/Library/Preferences/SystemConfiguration".
Notes
VMWare
If you boot Mac OS X 10.4.3 in VMWare please note:

Set "paevm=true" in your .vmx configuration file
Mount the ISO using Daemon Tools etc., not with the VMWare CD/DVD drive emulation.
If you tried everything but can't boot it NATIVE without a panic
User xtraa has found a great way to install Mac OS X 10.4.3 for native use. He uses VMWare to install to a physical partition and then boot natively from it. It seems to work for a lot of users. Make sure you check out his guide.

Something missing?
Some kernel extensions might be missing for your optimal hardware support. You should be able to put them into your working system afterwards (just copy to the /System/Library/Extensions folder). If something is missing, please send me a private message (PM) at the Mac OS X86 forum. Please also send me a PM if you can provide something, e.g. new kernel extensions or modifications to existing ones to support a broader range of device variants.

Here's a list of Maxxuss releases not included in the DVD/ISO Patcher v1.1. However, I've prepared them for easy installation:

SSE3->SSE2 Additional Patch for 10.4.3 v1
Alternative DVD/ISO Patchers
You might also check out other DVD/ISO patchers. For example, in this forum thread the users EtherealRemnant, pianoman, myzar and wesley are providing an alternative installer (InstallerPatchv3.zip). Also look for Patcher and Kernel extension releases from forum users like macgirl etc.

Peter_2

安装简介（如下说明为单硬盘XP（2K/2K3）和MAC共存安装）：

一、下载后，将第一个DMG文件用最新版UltraISO7.6.5转换为ISO文件，要确保转换后的ISO文件的MD5值为：
　
　　e7d86fefb4b5155890addbf7fae19398　　（切记一定要做MD5校验）

如果MD5值和这个不一样，则说明你的DMG文件已经损坏或不是10.4.3，则需从eMule修复下载或重新下载。
则不能应用这个补丁包。

二、然后下载PPF-O-Matic 3.0这个工具，将下载的补丁包解压，解压后是PPF文件，用下载的PPF-O-Matic 3.0给你转换的ISO文件打补丁。

叁、VM安装，这个步骤较复杂，只能简说一下，安装方法很多，只能择其一说一下。

　　用VM（好像5.0以上版本）安装，既可以安装在客户机上，也可以安装在实体机上。
　　在客户机上安装非常简单，就不说了。
　　用VM安装在实体机上，网上也已经很多了，就简单说一下。

(1) 在装之前，用PQ8分区大师（最好汉化的）先分出一个6G以上（一般10G以上最好）空白分区，分区切记一定要在扩展分区之前，否则不能安装。

(2) 然后创建主分区：
　　
　　＃在PQ中创建主分区，要选择未格式化的主分区，然后再打开PQ目录下的PTEDIT32.EXE，将要安装MAC的空白分区的类型改为AF（所在分区的第一个框）。

　　或者＃也可以用XP下的DISKPART工具来更改分区类型符（较麻烦），在PQ分出空白分区(1)之后，执行：
　　　　DISKPART
　　　　SELECT DISK 0（本说明只讲单硬盘，如果为双硬盘的第二个，则为DISK 1）
　　　　SELECT PARTITION X(X为你的空白分区号，可用LIST PARTITION 来查看号码)
　　　　CREATE partition primary ID=AF

　这样就建立了一个分区类型为AF（HFS）的MAC分区了。


(3) 要装上DEAMON　TOOL虚拟光驱，将转换好的ISO文件导入虚拟光驱中。
在VM中新建客户机，一路选择其它，内存越大越好，客户机建立后，在配置中删除虚拟硬盘，然后添加硬盘设备，将刚分出的MAC分区选择上。
(4)　之后用记事本打开你的VM虚拟机下的.vmx配置文件，添加一行：paevm=true
之所以这样，是因为10.4.3版的Tiger要求CPU的PAE(Physical Address Extension)支持（用HWINF32可以查看），所以没有PAE的机子还是用VM安装。

(5) 之后启动VM，将DEAMON　TOOL的光驱导入VM光驱中，启动安装。

如果出现 "Cannot load /com.apple.Boot.plist"这样的错误信息,可以在启动提示时按F8然后输入：
代码:
kernel=mach_kernel.xxx

其中"xxx"对应不同的kernel（只针对下载Maxxuss的kernel）。

进入设置，选择你适合的内核设置，有如下几种内核选择:

　　　　 　mach_kernel (默认): 同 mach_kernel.sse2　一样
　　　　　 mach_kernel.sse2: 支持 SSE2 CPUs, 需 NX/XD CPU 支持（在XP中可以打开控制面板－系统
　　　　　　　　　　　　　　　　－高级－数据执行保护，看你的CPU是不是支持DEP，支持DEP就有NX/XD）
　　　　　mach_kernel.nonx: 支持 SSE2 CPUs, 不需要 NX/XD CPU 支持
　　　　　mach_kernel.orig: 原来的内核, SSE3 CPUs 带 NX/XD 支持的

(6) 在进入安装界面后，选择上面的disk utility，将要安装的分区（会突显）erase，然后安装就可以了。

之后就可以尽情享受了MAC了。



　第一个DMG文件如果大家下的很慢，可以用BT种子，点此下载。

　第二个补丁包程序如果在电驴上下载较慢，可以在如下站点下载：

www.rapidupload.com

www.rapidshare.de


具体安装方法很多，大家可以用GOOGLE搜索一下！

有些骡友提了很多问题，确实很白happy.gif

其实我懂的也不是太多，尽能力总结答复一下：

只有是SSE2　或　SSE3的机子，AMD的机子是兼容SSE2/SSE3的，也应该都是可以安装的。

MAC Tiger可以实体安装，也可以用VM模拟安装做客户机，在VM上安装时，要在.vmx配置文件上加上一行 "paevm=true" 。先将ISO文件导入Daemon Tools 虚拟光驱中, 不要用 VMWare CD/DVD 光盘驱动器模拟.
实体刻盘安装，要机子支持PAE，所以还是建议在VM中安装，然后在实体中运行。


这个版本的MAC是至今为止，中文化程度最好的一个，性能的提升也是最好的。
MAC上的软件相当丰富，只要你努力去搜寻，因为MAC机本来是专于多媒体，所以这方面的软件很多。

这个补丁是第一版的，以后还会继续完善，只要能装上，以后升级补丁可以单独下，然后在MAC中打补丁也是一样的。

MAC系统不光是界面好，而且装在PC上启动运行也是相当快的，反正在我的本本上比XP要快，并不是像人所说的，装在PC上很慢。这个补丁包就是可以保证性能的！



其补丁的具体细节如下：

Maxxuss DVD/ISO Patcher for 10.4.3 x86

This is the first version (v1.0) of my DVD/ISO Patcher. It
will modify an ISO image of the Mac OS 10.4.3 x86 DTK (8F1099) DVD. This results
in a fully working ISO from which you can install Mac OS X on your system.
Contents of the DVD/ISO Patcher
此补丁包包括10.4.3的全部补丁和一些能更好的硬件支持的内核扩展.

列表包括如下:

Boot Loader Patch (applied to ISO)
Mach Kernel v0.3
Anti-TPM Patch v1.0: oah750, oah750d
内核扩展:

ApplePS2Controller (更好的支持　PS2键盘, PS2鼠标, trackpad),
AppleGenericPCATA.kext,
AppleOnboardPCATA.kext,
Maxxuss VMWare Network Driver.
　remove AppleTPMACPI and AppleFPMemDriver 内核扩展.

在ISO上这些文件由一个安装包"MaxxussPatches.pkg" 在安装系统时自动进行安装.
So you do not have to do anything special before, during and afterwards.

补丁包下载（可在此下载第二个文件）：
ZIP文档 (大约~ 45MB):

www.rapidupload.com

www.rapidshare.de

如何使用补丁包

用UltraISO v7.6.5转换 DMG 为　ISO 文件。

DMG转换为ISO文件"10.4.3_8f1099_for_dtk_userdvd.iso"后的 MD5 值为:
e7d86fefb4b5155890addbf7fae19398

(如果MD5值不一样, 将不会得到一个有效的文件).
补丁文件 (.ppf) 打补丁程序在 PPF 3.0 patcher software下载. It is available for Windows, Linux and Mac OS X.
Notes　

启动时出现错误信息

如果出现 "Cannot load /com.apple.Boot.plist"这样的错误信息,可以在启动提示时按回车或进入设置，选择你适合的内核设置，有如下几种内核:

mach_kernel (默认t): same as mach_kernel.sse2
mach_kernel.sse2: supports SSE2 CPUs, requires NX/XD CPU
support
mach_kernel.nonx: supports SSE2 CPUs, does not require
NX/XD CPU support
mach_kernel.orig: the original kernel, for use with SSE3
CPUs with NX/XD support
To select your kernel of choice, either

enter the name at the boot promt, e.g. "mach_kernel.nonx",
as root or with "sudo" copy the kernel file to "mach_kernel", e.g. "<SPAN
class=code>cp /mach_kernel.nonx /mach_kernel",
or as root or with "sudo" edit the file "com.apple.Boot.plist" in the
folder "/Library/Preferences/SystemConfiguration".
VMWare
If you install Mac OS X as a guest in VMWare please note:

Set "paevm=true" in your .vmx configuration file
Mount the ISO using Daemon Tools etc., not with the VMWare CD/DVD drive
emulation.
Something missing?
Some kernel extensions might be missing for your optimal hardware support.
You should be able to put them into your working system afterwards (just copy to
the /System/Library/Extensions folder). I know of the following and will include
them as soon as possible.

NForce4 (broader card support)
AC97 Sound
If something is missing, please send me a private message (PM) at the Mac OS
X86 forum http://win2osx.net/forum.
Please also send me a PM if you can provide something, e.g. new kernel
extensions or modifications to existing ones to support a broader range of
device variants.
Alternative DVD/ISO Patchers
You might also check out other DVD/ISO patchers. For example, in http://win2osx.net/forum/showthread.php?t=1650,
the users EtherealRemnant, pianoman, myzar and wesley are providing an
alternative installer with support for NForce 4 410 (InstallerPatchv3.zip).
Also look for Patcher and Kernel extension releases from forum users like
macgirl etc.
____________________________________________________
ISO 是什么文件？ISO 是一种虚拟光驱文件，需安装虚拟光驱软件才能使用。

如何打开 .ISO 文件？推荐使用 Daemon Tools、Virtual Drive打开。
_____________________________

引用：

    * http://spaces.msn.com/members/Brolande…… ——Brolander
      驚現MAC OS X x86版
    * escorted europe tours ——Awala Marco
      11.281.1aMac OS X Tige...